Technology

TopCon 3 bin air seeder rate controller, was removed from a Bourgault cart, complete from tractor to cart, got taken off to replace with John Deere system 

No unlocks.  Used as a second monitor for spray tractor.  No further use.  Good condition

John Deere 2630 Display.  Auto Trac SF2/RTK activated.  Screen works perfectly.  Surplus to needs.  Can post Aus wide.

Trimble Field IQ Module with Switch box.

Used on Stoll Sprayer. Was mounted in tractor cab so all wiring and module in good condition.

Complete Trimble GPS System removed from Case 8940 Magnum Tractor. RTX Subscription. Includes : Trimble 1050 Screen, Nav 900, Auto Pilot Steering Wheel and complete wiring harness. Only 3 years old.

This Unit includes 2 years of CentrePoint RTX subscription.

*XCN1050 Display with Serial TUVR section control unlock.

*NAV900 receiver with Medium Accuracy Unlock Activation.

*Steering Activation unlocks for Full Autopilot operations, including CAN Autopilot, Autopilot VDM-912 and AutoPilot Motor Drive APMD.

*SAM-200 electric steering wheel with APMD/EzPilot PRO harness kit.

*Kubota M135X Steering spline kit.

*CentrePoint RTX 2.5cm PPP Subscription Expiring on the April 19 2027

Used Trimble auto steer kit. Removed to fit a John Deere system. All in good working order with RTK unlock and antenna included. All cabling included. Hydraulic valve has been left on the sprayer. 

Used x35 Display with display cables (fitted April 2020) Good condition 

Trimble GFX750 - 2023 Model

Nav900 Received

Sierra Wireless 

RTK Unlock

Cables included

WANTED TO BUY:

Trimble FM750 Screen with an Ezi Pilot Steering System.  Preferrably suitable for a John Deere Tractor.

John Deere 4640 display

Has Auto Trac activated 

Topcon x35 Screen & Apollo CM-40.

Includes all harness from X35 Screen to Tow Behind Seeder Cart.

Only been used to operate Liquid Systems Module.

New Topcon AGI-4 receiver (receiver only) 

New AGS-2 Receiver (receiver only)

Latest software can be updated. (screen only) 

This Unit has 2 years of Centrepoint RTX subscription included.

*XCN1050 Display with no additional product control unlocks.

*NAV900 receiver with Medium Accuracy Unlock Activation, no additional Steering Activations (NAV-III Connectivity only).

*NAV-III controller in very new condition, new RRP $11K.

*CentrePoint RTX 2.5cm PPP Subscription Expiring March 2027

Trimble Ag252 receiver

If you can use it call me

RTK Radio installed 

Burnado Hill Airseeder blockage monitor.

Comes with 65 32mm hose sensors. 

John Deere StarFire RTK Radio 900. Previously paired with Starfire 6000 Reciver. Surplus to requirements due to upgrade.

Package 1 ($7,000+GST): Outback BL-R01 radio, Outback CDA-3 GPS antenna, Outback S3 screen, Outback eDrive, Outback AC110 rate controller (current model $2750 USD brand new), hydraulic valve block & steering controller. Previously installed on John Deere 6630 tractor & Croplands Sprayer, complete set.

Package 2 ($6,000+GST): Outback BLX-R03 radio, Outback A22 GPS antenna, outback S3 screen, Outback/Topcon VSi steer module, Outback/Topcon VSi junction box Outback eDrive. Currently installed on a 9352 MacDon Windrower (also advertised for sale) willing to separate.

Package 3 ($4,000+GST): CSi Wireless SBA1 radio, Trimble Hurricane L1 GPS antenna, Outback/Topcon VSi steer module, Outback/Topcon VSi junction box, Outback eDrive. Previously installed on John Deere 9750 Harvester (brackets to suit), would need screen to make complete set.

Package 4 ($3,000+GST): Outback eDrive X, hydraulic valve block & steering Controller. wheel angle sensor. Previously installed on John Deere 8420 for seeding, would require radio, GPS antenna and screen to make complete set.

Base Station ($3,000+GST each): Outback Baseline X, model BLX-B03, two available.

Wiring Harnesses ($make an offer): John Deere female-to-female adaptor (JD Part No. PFP10470). GPS Antenna Cables (Quantity 3). Radio Cables (Quantity 2). S3 Screen Harness. Assorted Power Cables (Quantity 4). eDrive VSi cable (Part No. 051-0316-000).

$20,000+GST Negotiable on the whole lot.

Hardi, Hyd Boom Control Box. (New) $680 plus GST

TopCon -MDECU $1850 Plus GST - looms to fit Ausplow M18000 inc if required.

Brand New Vector Pro Receiver. No unlocks. Taken off a brand new machine as we don't use Case steering systems. 

Used Vector Pro Receiver. Good condition. No unlocks

Used Case 372 receiver unlocked to RTK

CASE/TRIMBLE FM750 with RTK activation. Includes all leads.  Will need Modem or Radio. A 4G modem can be supplied for $2200.00 (incl GST) Modem includes all harnesses and 12 months sim card plan.  In very good condition with RAM mount included. Can be supplied as screen with RTK activation ($4950 (incl GST) or $7150 (incl GST) for the package.