Harvest

2013 Macdon D65 45ft Tyne reel with cross auger . CNH 

new knife and guards (done 2 seasons) , new middle Draper belt ,hydraulic pump and drive tube last season on a LIENERT comb trailer in tidy condition.

2012 Case 2152 40ft, roller bearings replaced, new reel drive sprockets and chain last year, new knife sections. Can come with stubby guards, also comes with 4 axle Elbourne comb trailer in good condition. Selling due to upgrade 

2006 John Deere 9660 STS, 2009 635D Front

5563 Eng hrs, 4123 Rotor

Steer Ready (can re-install brown box if required)

Near new drive tyres

All new shaker arms 2024 season

Extensive yearly maintenance 

Call or message for more info

2011 MacDon M150 Windrower, 4654 Cutting Hours, Trimble GPS with RTX, Hydraulic Block to run a Conditioner, MacDon D60 30' Front, Rotor Shears, Top Cross Auger, Leith Comb Trailer, Weight Box. Fully Maintained in Excellent Order, Crop Ready, $169,000 plus GST

29ft Pea Plucker front on trailer. Had new tyres put on last year 

Modified to suit John Deere front, has multi coupler

2013 Build

3196 Engine Hours. 2419 Rotor Hours

Pro Drive Transmission with Harvest Smart. Premium Cab, HID Lighting.

GS3 2630 Screen mounted on arm rest with 3000 Receiver.

John Deere Link Ultimate.

Fine Cut Chopper

Dual Front Wheels

Chop and Drop Rear End

40 ft Hydro Flex Draper Front on Goldney Welding Trailer with Tool Box

2005 build, 6250 eng hrs, 4486 rotor hrs

c/w Comb trailer & canola auger

Drive tyres 2 seasons old

Serviced annually by New Holland Dealer

Out of a John Deere

Suits late model S680, S690 or S780, S790

Has been used to clean snails out in lentils

5416 engine hours 

3990 separator hours

Comes with 30ft comb with batt reel

Miller Nitro Adapter and Honeybee

36ft Honey Bee windrowing/hay front 94C

Centre delivery or side delivery

Comes with centre adapter for New Holland Header. 

Comb Trailer included

$25,000 ex GST

New Holland CR9.90 Revelation, 2019 build with Macdon FD145 comb 1299 Rotor Hours 1658 Engine hours Comes with intellisense and opti-spread. Macdon 145 (came new with combine) and trailer included, Cross augur and AWS air reel fitted (3 seasons use). $615 excluding GST*

Used 2011 New Holland Combine & 88C Flex Draper Front - Combination Deal $150,000 + GST.

Good condition, cab with ROPS, hopper, chaff spreaders, 900 singles, steering valve block, reconditioned hydrostatic pump, approx 4000 engine hours, 3000 rotor hours, proven twin rotor technology. Good Year tyres - Front 900/60R32 - Rear 600/65R28. Stock No: 500033

NH 88C Flex Draper Front - 36', Finger Tyne Reel & Transport Kit. Stock No: 500034

Used 2022 MacDon PW8 Front. $ 50,000+GST.

Excellent condition, like new as only harvested 400ha of canola - Stock No: 500037

52 Lifters

Schumacher type

Used 2002 FINCH 22T Chaser Bin $75,000+GST.

Fresh full re-spray, Hydraulic drive - easily convertible to PTO if desired, rear frame suitable for mounting fire unit, fully serviced by Finch when auger & bin were extended. Stock No:500058 

CONTACT US TODAY FOR AN EOFY DEAL! 

Used 2019 CLAAS Lexion 780TT Terra Trac  $450,000+GST.

Combine Only. Full Cemos Auto, Cruise Pilot, Auto Greaser, Dynamic Cooling, Mercedes Engine - 1189 Rotor Hrs, 635mm Tracks, leather seats, serviced annually by us, Very Good Condition. 

Stock No: 500017

CONTACT US TODAY! 

Used 2016 CLAAS Lexion 770T $325,000+GST.

Cemos Auto, Cruise Pilot, Auto Greaser, Dynamic Cooling, Mercedes Engine - fitted with a 780 engine!, 635mm Tracks, serviced annually at Bascombe Auto Ag, Good Condition.

Stock No: 500044

CONTACT US TODAY FOR YOUR QUOTE! 

Also available - 2016 Macdon FD75 45' Front, top auger, comb trailer, good condition $120,000+GST Stock No: 500045

4200 Engine hours.

3000 Rotor hours.

36 foot 5100 Agco Draper with upper cross auger and trailer.

Both in good condition.

2019 10.9 On SmartTrax @ 3m centres 

Fully pre seasoned including 2 x New tracks

Fitted with 
intelli Sense crop automation
Crop Scan AG 3300H protein and moisture DFR, opti spread and Twin pitch rotors. 
unlocked to RTK 

Seed terminator built in 2021 to go with has done roughly 700h

Unit has 2350RH 

2020 FD145 Macdon on elbourne trailer. Front had all Draper bearings replaced 200h ago and has had preseason inc new knife  

Can separate

$600,000 + GST

John Deere 9760 STS harvester, excellent condition, harvest ready.

John Deere 936 D Draper Front & trailer.

John Deere 615 P pickup front & trailer, excellent condition.

John Deere pea plucker & trailer, excellent condition.

54 units, new condition. Includes few spares parts.

68 units, new condition. Couple spares.

2017 model but purchased 2018. 
2077 engine hrs, 1570 rotor hrs

Chaff spreaders & Chopper. 2x camera's in grain tank and at the hitch. Only harvested cereal & canola. Fully serviced for 26' season and have history report. Didn't use for one season.

Macdon D140 2018 model 40ft, Elbourne comb trailer, serviced ready to go. Both in good condition. Can assist in the first 500km freight. 
$530,000 + GST

New reel bars to suit JD640D front $550inc

Chaff Cart chuts, guards and blower came off a 97 series header $300inc

Crop lifters $5 ono 

lentil lifters $5 ono 

New Holland TR85 Header and New Holland 806 double knife tin front on comb trailer. Also comes with another TR85 Header. (Donor/wreck).

TR85- Cat 3208 6451 Eng hrs.Tyres in good condition. Front tyres 30.5L-32, rear tyres 14.9-24. Was in operating condition when parked 2 years ago.

Donor/wreck TR85. Cat 3208 operational, Front tyres 28L-26. 1 rotor gearbox and bubble up auger gearbox damaged. 

10.7mtr  35 foot 150x150x5mm 14" walkover wheels  fully adjustable mounts and wheel position