Harvest

Case 1688 Rice model

5000 engine hours

Spec rotor

Rear wheel assist

Stainless elevator housings

New elephant ears an rotor bearings

New delivery auger with housings in bin

Tyres plenty of tread

Used as back up machine..no longer needed

Excellent condition always shedded

Canola sieve suit case 88 series combines anything from a 1688 to a 7088

single mesh with shaker chains

No further use

Canola sieve suit case 88 series combines anything from a 1688 to a 7088

Top and bottom mesh with shaker chains

No further use

Will consider selling separately 

Engine hrs; 1460hrs

Rotor hrs; 1003hrs

This machine is equipped with the following;

Pro drive transmission, dual 580/85R42 and 620/75R26 tyre package, power folding lids, combine auto maintain cameras, active yield, harvest smart, active terrain adjustment, premium cab, advanced power cast tail board, contour master feeder house, Gen 4 screen with premium 4.0 activation and a Seed terminator that’s done 346hrs fitted two seasons ago.

Also comes with a 2021 John Deere RD40F front on a trailer 

The header is fully serviced and harvest ready.

Can provide full service history upon request.

$700,000 + GST.

John Deere 640d with trailer. Tyne reel, top cross Auger. Always shedded.

Has done 1800hrs / 22450ha’s, 50 inch deep belts, upper cross auger,

Course knife 40% worn, comb trailer.

**M1240 tractor, done 3000 hours also available, if of interest to sell the unit. 

2017 build, deluxe cab. Trimble 1050 autosteer. Good straight machine. 

$260+GST

Suit CNH - Leith contractor trailer "can sell without trailer if preferred" 

Adapters to suit other makes available 

On Elbourne trailer, 3587 engine hours, 2709 rotor hours. Inspection and pre season repairs carried out by Emmetts Crystal Brook 

2nd owner since new. 4012 engine hours, 3066 rotor hours. Ag leader steering system screen not supplied, set up for yield mapping and moisture control with a 1052 30ft draper front. Always serviced and in great condition 

On trailer, new mats last season. 

Second 914 unit also included for spares. 

Single knife 

Upper Cross Auger 

Near new knives, belt and guards 

Good solid trailer 

3326 Engine hours

2321 Rotor hours

Header check has been done very little needs to be done to be paddock ready.

Has been fully maintained by Reddens Crystal Brook up until the last few years, then it has been maintained by James Ewes, has had all their modifications, including Reddens up dated rotor. Motor has been tuned and is extremely fuel efficient and has ample torque/power. Strong history of preventive maintenance, has been very reliable. 

4951 E Hrs, 3592 R Hrs inbourd chopper, pro 600 monitor LED work lights, UHF, top cross auger & front has triple desks so can windrow, Hyd ram for tilt, stump jump

3 axel comb trailer on suspension

Serviced annually by qualified mechanic 

Excellent machine, only selling due to upgrade. 

3700 Rotar

5000 Sep

Very well maintained/looked after machine

Always shedded/no lentil work.

UHF/Light bar/one brand new front tyre/final drives fully refurbished 250 hours ago/near new feeder house chain.

Arm rest upgrade to cater for Gen4 screen/John Deere Greenstar ready.

Selling due to upgrade

John Deere 30ft Flex front with trailer. Front is in good condition and always shedded when not in use. 

2021 Honey Bee Air Flex 245. 45ft flex front (CNH spec) with Leinert Engineering trailer. New parts fitted in 2024 listed below

- Knife, knife guards, knife head bearings and ball joints. 

- Tyne reel bushes

- Centre belt drive roller

- 90% of the drive belts replaced

- Gauge wheel kingpins

Selling due to upgrade.

Price heavily reduced for quick sale. Call 0439 891 119, Please leave a text message if there is no answer.

2009 42ft Honeybee 94C header front with cross auger.

2017 Miller Nitro header front adapter to suit honeybee front. Comes with spray boom.

Would consider selling items individually.

1,385 Rotor/Separator Hours
Fuel efficient, well-maintained machine, 16.0L Mercedes-Benz OM 502 V8 
Dynamic cooling layout that helps keep your engine bay and machine clean
12,500L grain tank with high-rate XL unloading auger 
Preventative maintenance with extensive replacement of key wear parts over recent seasons
Currently running wide tracks - one needs replacement which is reflected in price 
CEBIS, steer ready, integrated moisture sensors and full yield mapping capability, upgraded heating and cooling climate-controlled seat
Priced very competitively for an immediate and straightforward transaction. Genuine private sale due to a shift in business operations. We can assist with or coordinate necessary pre season work alongside freight logistics

With 30ft 972 front with trailer, spray tank and boom lines fitted, low 1936 eng hours, Cummins motor, End knives, Excellent condition. 

Suit CNH, can change to John Deere 

Trailer available at extra cost 

Delivery available 

Excellent-condition Class 7 machine that has always been shedded and well looked after. Extremely reliable machine that has been a fantastic header to own and operate. A genuine joy to drive and a regrettable sale, but there is a genuine reason for selling.

Machine:

•Cummins common-rail engine – 350 hp

•Approx. 4,400 engine hours / 3,600 rotor hours

•Electric sieve adjustment

•Pro 600 yield monitor

•Factory steer-ready

•Fitted with a new Topcon ACU-1 steering controller and harnessing

•Can be fully equipped with Topcon X25 or X35 auto steering if required

•Hydraulics fitted to run a chaff cart

•Very reliable and mechanically sound

•Presents in excellent condition

•Flagship adapter which has lateral tilt 

36ft Draper Front & Trailer Included:

•36ft Draper front

•Triple-deck configuration, allowing it to also be used for windrowing

•trailer included

I also have a brand-new Topcon YM-3 yield monitor available separately if required, which can be paired with a compatible Topcon display for yield mapping.

This is a proven and very reliable machine that’s ready to go straight to work. It has been an excellent header for us. 

Came off a 1460. Bat reel, primary sales filler fingers, nylon retractable fingers. Always shedded
In really good condition for its age. 

Two seasons old, front sold

Suits MacDon FD140.

Can fit other fronts, has adjustable mounts

Purchased in 2023, 40' flex front to suit John Deere with AWS air reel new in 2025, included 2023 Herby Ag trailer

971 front with air reel 

Well maintained machine, Plenty of spares and service books 

Hrs in photos 

1010 front batt reel 

Hrs in photos 

John Deere S790 MY2022 

650/85 R38 duals 750/65 R26 on the rear

Side hill preformance package, Advance PowerCast tailboard, 28' auger, Premium lighting and cab

low Hrs 987eng 763rotor