All Categories

2003 maxitrans 48ft drop deck airbag suspension manual ramps 16ft top deck suits 2 sqaure bales long aluminium floor on bottom deck tares about 7.2T tool box water tank under tray binders spare wheel carrier brakes good some tyres getting down but still roadworthy   sold with vic reg but no rwc 

10 pallets A trailers
green one
1994 kreuger airbag suspension 22ft deck  20ft pins toolbox under tray track for binders front and rear hurdles near new nylon top turntable head
brakes good tyres are getting down but think most would pass rw  can throw in a few extra if needed   approx 7.6m pin to pin  990mm pin to front and  centre of turntable to rear of tray  is 1890mm  bit rough around the edges but nothing that can't be tidied up no reg no rwc $20000 plus gst
blue one
1997 AFM 5" combing spring suspension 20'6 ft deck with 20ft pins toolbox water tank front & rear hurdles nylon pad on skid plate has rear hook up air lines  approx 7.6m pin to pin 1200mm front pin  centre of turntable to rear of tray approx 2540mm
turntable could be moved forward 150-200mm easy enough no reg no rwc    pretty straight trailer overall $25000 plus gst 

1,385 Rotor/Separator Hours

Fuel efficient, well-maintained machine, 16.0L Mercedes-Benz OM 502 V8 

Dynamic cooling layout that helps keep your engine bay and machine clean

12,500L grain tank with high-rate XL unloading auger 

Preventative maintenance with extensive replacement of key wear parts over recent seasons

Currently running wide tracks - one needs replacement which is reflected in price 

CEBIS, steer ready, integrated moisture sensors and full yield mapping capability, upgraded heating and cooling climate-controlled seat

Priced very competitively for an immediate and straightforward transaction. Genuine private sale due to a shift in business operations. We can assist with or coordinate necessary pre season work alongside freight logistics 

Macdon 9300 windrower with 30ft 972 front with trailer, spray tank and boom lines fitted, low 1936 eng hours, Cummins motor, End knives, Excellent condition. 

2 x 580/70R38 Alliance tyres. One tyre was staked, repaired and patched. 25% tread, no cracks.

2 x 14.9x24 wheels and axles off Shearer 3T airseeder bin. Tyres in average condition with cracks between lugs. Other bits of the airseeder box available, any offer.

Stored in farm silos. Approx 40 tonne.

Can deliver locally at buyers cost. 

Scepter variety uncleaned. Stored in farm silo.Approx 30 tonne available. Can deliver locally at buyers cost.

Great machine.No longer needed.

Always shedded in very good condition

Sherwell 40 ton grain silos.

Fair condition for there age but both require work on the grains hoppers.

Choice of 2 silos.

Price is per silo.

Purchaser to organise removal.

Sharman 60 ton grain silos.

With centre fill ground operated lid and man hole fitted.

In excellent condition. Choice of 2 silos.

Price per silo.

Purchaser to organise removal.

Heard 28 ton PTO Auger Bins with centre fill.

In excellent condition and harvest ready.

Choice of 2. Price is per bin.

Newholland 411 disc mower conditioner 

Sitrex QR10 V-rake. Great simple little machine. Bought new in 2016 from Lyndoch Motors. Can lower or raise either side individually or both at once. Has been the perfect rake for our 14 foot mower. Just stepped up into a 16 foot mower so stepping up into a pto rake as well. Still in good condition. Hasn't done much work. Call if interested on 0427959715

Mother Bin

Hold approximately 45ton of wheat

Used 2025 harvest

Hydraulic Proline
Rock auger with good tips.

5m Bowl, legs, bolts onto turntable bracket.

Will load onto your truck.

Moonta Motor Trimmers / Moonta Engineering 

Galvanised 1000 Bag Chassis Bin 

Hydralic Lids 

Great Condition and well maintained 

Ready to go!!!

4 stand curved raised board shearing shed fitout, holding capacity 500 XB ewes under cover, current shed size is 15.6m x 24m but could be modified to fit larger or smaller shed.
Greg Kendrick Built 2010 not used for last 3 years.
Shed loading ramp and count out pens included.
Buyer to remove at own expense. 

3900lt, pro drive, rate control, load cells

can spread to 36m set up at 27m at the moment 

2021 build 

Suit CNH , Can change to John Deere 

Trailer available at extra cost 

Delivery available 

$100+ gst 

2022 Krone Easy Cut 6210cv mower conditioner 

6.2 meter cut 

Twin cutter bar 

2 speed flail conditioner 

Leaves 2 separate 3 meter windrows 

Mower is in excellent condition and hasn’t done a lot of work 

$90,000 plus GST negotiable 

2001 Case mx 170 neat and tidy tractor well looked after. 4744 hours, wiring for John Deere auto steer, no 3pl. 

32 by 6

Hendrickson Intrac Sups

Electonic load Scales

Razor electric tarp( New)

Excellent condition 

Road Train & B/D rated

2 wheel drive, 3 point linkage, approx 55hp, diesel, roll frame, mechanically very good

2 wheel drive, diesel, roll frame, 3 point linkage, near new tyres, good working order

Excellent-condition Class 7 machine that has always been shedded and well looked after. Extremely reliable machine that has been a fantastic header to own and operate. A genuine joy to drive and a regrettable sale, but there is a genuine reason for selling.

Machine:

•Cummins common-rail engine – 350 hp

•Approx. 4,400 engine hours / 3,600 rotor hours

•Electric sieve adjustment

•Pro 600 yield monitor

•Factory steer-ready

•Fitted with a new Topcon ACU-1 steering controller and harnessing

•Can be fully equipped with Topcon X25 or X35 auto steering if required

•Hydraulics fitted to run a chaff cart

•Very reliable and mechanically sound

•Presents in excellent condition

•Flagship adapter which has lateral tilt 

36ft Draper Front & Trailer Included:

•36ft Draper front

•Triple-deck configuration, allowing it to also be used for windrowing

•trailer included

I also have a brand-new Topcon YM-3 yield monitor available separately if required, which can be paired with a compatible Topcon display for yield mapping.

This is a proven and very reliable machine that’s ready to go straight to work. It has been an excellent header for us. 

As new, baffles in outer wings, currently full of water

A frame folds around to sit on a 40ft flattop

Excellent machine, reason for sale, change of circumstances.

10.5m, 270mm spacings, cameras in both boxes, Agmaster presswheels and mouthing arms (only 3 years old), Smallaire kit, boots and hoses (only 3 years old), Alfarm tynes with custom made end on the shank, keech points and heaps of spares.