Sundries

Stick Rake was used in almond orchard on a 150hp Front End Loader.

Width 3110mm x Height 1120mm  Prongs 1150mm

Constructed of 75 x 75 x 6mm RHS and 12mm plate.

No bent tynes or frame.

NEW 48m x 20m x 6m Machinery/Hay shed.

Delivery avaliable.

Doors avaliable.

Photos of identicle erected shed.

Neta Uniram Poly Drip Pipe

AS 20012 2.3LH  0.6m   300m

83 Rolls  -  Selling as a whole unit

Bought 4 years ago to replace poly in vines.

Removing vines instead.

Poly has been in a shed since purchase.

Timber frame 50 by 60 foot sheep yard cover. Includes 6 out of 7 rafters, two of which have end infills purlins, and corrugated iron. The missing rafter was damaged at the time of dismantling. No posts are included.

Fully dismantled ready to truck.

$5,000 + GST

Compair/ Proair 3 phase workshop compressor, large capacity, was in use until recently. 

Approx 2000 Litres

6 stud Cruiser Rims

Rocker Spring Suspension

Tail lights

Pin hitch

Side and guards included

Electric Motor

Kelly and Lewis 2inch pump 

Various lengths of inch water pipe with sprinklers. 

All in good working condition, upgraded whole water system at the bowls club so no longer needed

Unsure on prices, make an offer 

Caterpillar Irrigation Motor. {Perkins 6/354} 

96 HP, has done Approx 6500 hours . Not used for a number of years and stored in shed. 

1000L fuel tank, ladder included.

With 84 inch cut. New blades and bearings. Roter and blades machine professionally balanced.

Ex Council, 3PL, suit 50 horsepower plus tractor

6m wide x 45m long. 200 micron thick. Unused rolls.

Ideal for bunker covers, hay covers, concreting and retaining walls.

$90 per roll

Event 10 cubicle toilet block 5 units each side each with soap/paper towel dispenser and a bin. Unit has 240 v pressure pump for tank water or connect to mains. It has large lockable storage locker on end. Unit is ex government and is in as new condition 

Smallaire Blower fan kit

Series 15

New 2022, never used, purchased for a baler but never fitted

Comes with Manifold & 6 Outlets

$3,850 inc GST

10000 litre poly QuantumDiesel tank. Good condition

Symond TPL blade plough 1.8 metre wide. Good condition for age.

Howard Extra Heavy Duty 8' wide Slasher, 3 point linkage

Waratah Agricultural Implements 6' Grader Blade, adjustable, serial no: 3491

3000L Fully Galvanised Cartage Tank, Good Order, Suit Fire Truck 

Walco Cable Roller 2.6T Capacity, Chain Drive, Suit Cable, Layflat Hose Etc, Good Order 

Alpha 3" Quick Fill Fire Pump, C/W 16hp Briggs Powered, Shaft Driven, Done Little Work 

Suit Oval & Park. 

Standard roller kit or optional wheel kit comes with both.

Just had first set of blades.

Suit near new buyer.

Cat CB24B 2016

Includes 3 years (1000h) Extended Protection Plan 

(Powertrain & Hydraulics)

12V Chemical transfer pump with Enviro fitting & probe, works well just not required anymore

Galv corrugated Elix liner water tanks from 40,000 to 365,000 Litre supplied and installed throughout South Australia and Western Victoria.

See https://www.elixtanks.com.au/elix-liner-tanks/

All tanks being manufactured at our Mannum Tank Facility using tough Australian made Z600 grade Bluescope corrugated galvanised iron walls ensuring a strong and highly corrosion resistant tank, with no need for sacrificial anodes.

All Bluescope Colorbond colours are available along with traditional galvanised finish. They are manufactured in mann SA and assembled on site  by our experienced installation team.

They are all 2.2m high and vary from 4.8M to 14.6M diameter.

Pricing is for the 104,200 Litre; 7.8M diameter x 2.2M high.

Extra charges may apply.

Loading Ramps (Pairs)

3 Tonne $950

5 Tonne ramps sold

3 Tonne ramps $1,150 sold

200 L

Auto shut off nozzle, 4 - 5 m hose

Piusi pump