Cambrai - SA

A/c AE & DK WILSON
Onsite & Online with AuctionsPlus
Auction Page Link available here shortly

Inspection:  Friday July 24th & Saturday July 25th from 9am to 12pm
Follow the signs from Redbank Road, Cambrai

(flexible collection by negotiation)

(flexible collection by negotiation)

(flexible collection by negotiation)

(flexible collection by negotiation)

Good running order with annual pre-harvest inspection & service. 5246 Engine Hours, 3785 Separator Hours, Registered to 21/10/26

With 4240 Display with JD Auto Track, Registered to 12/7/27, 2000hrs, as new, one owner, Front & Cab Suspension, Rear Wheel Weights, 14 x Front Suitcase Weights inc Hardware, 3 Rear Remotes, 3 Point Linkage, PTO, John Deere 4240 Universal Display, Starfire 6000 Receiver, Annually Serviced at Emmetts

PTO & Hydraulics, 9200 Hrs, Registered to 17/8/26, Good working order

Titan 8 Ply, 23.1-34 - Near new, approx 40 hours of use.

3PL, PTO with hydraulics 3889 Hrs, not registered

With Draw Bar with Hydraulics, PTO not currently working, not registered

3PL , PTO, not registered

24 Run Seed Drill with Press Wheels & 450 Breakout Tynes - One owner, double chute, 4.2m wide, full set of restrictors, spare press wheel and press wheel assembly, multiple spare tynes, multiple new spare points, plus brand new farmscan jackal hectometer never used.

15' Model #1316S, Purchased from new, pre-season check and change oils on 30/9/25 by WSB Distributors

25287 Bales, Fully Serviced August 2025; Annually serviced @ Vater Machinery; Complete with Inbuilt Delmhorst Moisture Meter FX-2000 and Probe; one owner, Cover edge net wrap system net/string; Near new tyres; Very Good Condition

3800m roll

Fusu Fighter 10.0 lwb 6 speed, 260,000kms, Purchased new 1 owner, 266hp, registered to 4/10/26. (Stock crate not included), SB34EL, 4X2 Tray Top; Floor 5mm thick steel checker plate-fully welded around edges; Dimensions Nominally 6200mm long X 2490 wide; 4X drain tubes in floor; Steps both side at front; Underbody toolbox, 1000mmX500mmX500mm; Alloy Bull Bar; Tinted Windows; Good Tyres; GVM or GVM/GCM 16000/25000; Regularly serviced every 10,000km @Govan PTY LTD

Aluminium Stock Crate, Purchased from new 1 owner, Aluminium 2nd Deck; 6200 X 2490; one owner; sheep/cattle/pigs; crank deck bottom deck to suit single deck of stock; 2/1 (2 or 4 Pens); pen divider to suit top deck; Drop down slam shut gates bottom deck for loading; rear bumper protection rubber; 4 X Jacks (for Removal)

Purchased new 1 owner, 14,650kms, Good Running Condition,farm registration to 29/6/27, regularly serviced by Bridgeland Motorcycles Murray Bridge

With Hammer Mill & Scales, comes with 1”- 3/8”- 1/4” screens; Inc spare parts, chains, sprockets, bearings; Chains & Sprockets replaced recently

With Hydraulic Hay Feeder, comes with 3/8”- 1/4” screens; Chains & Sprockets replaced recently

Working - Has spare streaming nozzles

1.2m Drum, 25mm thick

Super Drive Seized

With spare blades & bolts

With 3 spare discs, one coulter missing

For New Holland Rollbar Rakes

With 3HP Honda Motor

Has 12v Pump, hose & nozzle. 80lt/min

Had unleaded

Farm Registration to 2/9/26, Engine in good running order. (tank not included)

Not currently running, driven then parked 5 years ago

Farm Registration to 27/3/27, 89500 Miles, Running

Freighter - Not running, has new radiator

2WD, Petrol, 162,000kms,fully registered to 28/9/27

Petrol, Farm use only, not registered, current alternator not re-charging battery, but runs well

Seed & Super unit needs new belt

Working when last removed 2 years ago

With chicken wire added

1870 x 1510

2200 x 1430

To Suit Chamberlain 4280

Scrap or Parts

Ash Fawcett 0439 131 925

David Schultz 0408 816 943

Nutrien Fawcett